Description
WOODWARD 9907-165 is a steam turbine governor used to control the speed and output power of a steam turbine. It is a mechanical governor, through the mechanical lever and connecting rod mechanism and other components, the speed signal of the turbine into the oil pressure signal, and then through the hydraulic system to adjust the intake or exhaust gas of the turbine, in order to achieve the stable operation of the turbine and the precise control of the output power.
WOODWARD 9907-165 turbine governor has the characteristics of high precision, high stability and fast response, which can adapt to different turbine types and operating environments. It is usually used in conjunction with steam turbines, generators and other equipment, and is widely used in industrial fields such as ships and power plants.
When using WOODWARD 9907-165 steam turbine governor, the configuration and control program need to be written according to the specific industrial application scenario. It is usually necessary to connect the sensor and the actuator, set the communication interface and parameters, write the control program, and download the program to the governor. During operation, the governor will automatically adjust and stabilize according to the actual control requirements to ensure the normal operation of the turbine and the accurate control of the output power.
In short, WOODWARD 9907-165 turbine governor is an important industrial control equipment, widely used in the control system of steam turbines, generators and other equipment. It can improve the operating efficiency and stability of the equipment, while reducing the labor intensity and error rate of the operator, and provide an important guarantee for the stable operation of the industrial automation control system.
WOODWARD 9907-165 The use of Woodward Steam turbine governor consists of the following steps:
Installation and commissioning: Install the governor to the control cabinet or operating platform near the steam turbine, and connect the sensor and actuator according to the instructions to ensure correct signal transmission and action execution. After the installation is completed, it is necessary to debug and test to ensure that the governor can operate normally according to the preset control logic and parameters.
Parameter setting: According to the turbine model, operation requirements and control system requirements, set the control parameters of the governor, such as target speed, start/stop speed, acceleration/deceleration, etc. These parameters can be set and adjusted according to actual needs.
Control program writing: The use of supported programming languages (such as C++, C#, etc.) to write control programs, according to the actual control logic and algorithm to achieve the control and operation of the governor. Ensure the correctness and stability of the control program.
Program download and debugging: the written control program is downloaded to the governor, and debugging and testing are carried out to ensure that the governor can operate normally in accordance with the preset control logic and parameters, and can correctly respond to the state changes and operational requirements of the turbine.
Operation and maintenance: Start the steam turbine and control system and run the governor. During operation, it is necessary to pay close attention to the running state and parameter changes of the governor, and adjust and control the speed and output power of the turbine in time. At the same time, regular maintenance and maintenance is also an important measure to ensure the normal operation and service life of the governor.
It should be noted that when using WOODWARD 9907-165 Woodward turbine governor, the relevant safety specifications and operating guidelines should be followed to ensure the stability and safety of the system. At the same time, depending on the specific industrial application scenarios and actual needs, additional configuration and control optimization may be required.
【 Main products 】 If you need to send to help you compare the price oh!
Main brands include ABB, Bailey, GE, FOXBORO, Invensys TRNEX,
Bentley BENTLY, A-B Rockwell, EMERSON Emerson, B&R,
MOTOROLA, FUANC, REXROTH, KUKA, HONEYWELL,
NI, DEIF, Yokoho, WOODWARD, Ryan, SCHNEIDER,
Yaskawa, MOOG, EPRO, PROSOFT and other major products
Main activities:
①ABB AC800M series module, industrial robot parts DSQCserIes,BaIley INFI 90,800xA,
Advant OCS wIth Master Software,wIth MOD 300software Advant OCS,Freelance–
Distributed Control System for Process Industry,Symphony Melody,Satt OCS,Symphony DCI System SIx,
Harmony/INFI 90, security system
②SchneIder(Schneider Electric)140 series product CPU module
③General electrIc(General Electric) series products IC693 IC695 IC697 IC698
Relay protection SR469 starts with SR369 starts with SR489 starts with SR750
IS200 / IS215 / IS220 / IS420 / DS200 / DS215 / VMIVME beginning 7750, 7807
(4) TIconex (invensys) series products 3721350, 3435, 1 B, 3625300, 9
⑤Bently(Bentley) 3500 series big card small card 1900 series power module
3500/15 3500/20 3500/22M 3500/42M 3500/25 3500/32 3500/53
⑥Allen-Bradley(US AB) series products 1394 beginning 2711 beginning 1756,1747 and so on
⑦EMERSON/WestInghouse series products OVATION system, WDPF system, MAX0 system spare parts.
DELTAV delta’s VE3008 CE3008 / SE3008 VE3007 / VE3006 SE4006P2
⑧Foxboro(Foxboro) : I/A SerIes system, FBM(field input/output module) sequence control, ladder logic control,
Accident recall processing, digital-to-analog conversion, input/output signal processing, data communication and processing, etc. FCP270/FCP280/FBM201… FBM242
⑨Woodword 9907-9907-5466-316 5501-467 5501- Beginning 8444- Beginning
⑩Bosch Rexroth(Bosch Rexroth) : Indramat, I/O module,PLC controller, drive module, etc.
Motorola: MVME 162, MVME 167, MVME5500, MVME6100 and other series.
Reviews
There are no reviews yet.