GE General Electric IS200TPROH1C AI Module Digital Input Module Programmable Controller DCS Spare Parts

Description

Regarding the GE General Electric IS200TPROH1C AI module digital input module programmable controller DCS spare parts, the following are some key information:
essential information
Product Name: GE General Electric IS200TPROH1C AI Module Digital Input Module Programmable Controller DCS Spare Parts
Brand: GE
Type: AI module, digital input module, programmable controller DCS spare parts
technical specifications
Working voltage: may include 24Vdc and 120Vac, which may vary depending on the application.
Output frequency: In some related products, such as other modules of GE, the output frequency can reach 350kHz, but the specific information for the IS200TPROH1C AI module may vary.
Resolution: Some descriptions mention a resolution of 1200Hz, but this information needs to be confirmed for specific products.
Power consumption: The specific value of power consumption may vary depending on product configuration and usage environment. A power consumption of 2200V has been mentioned, but please note that this may require further verification.
Adapting motor power: Adapting motor power may include 1800 and 1200, depending on application requirements.
Traction speed: It is mentioned that the traction speed is 200KM, but this information may be related to specific applications or supporting equipment.
Equipment weight: The weight range of the equipment may be between 20-200KG, and the specific weight needs to be determined based on the actual product.
Scope and Characteristics of Application
Scope of application: This product may be suitable for various industrial automation fields, such as CNC machinery, metallurgy, oil and gas, petrochemicals, chemical engineering, paper printing, textile printing and dyeing, etc.
Product features: May have high security, stable power supply, multiple interface modes (such as Ethernet network interface), and other characteristics.

Model Name: IS200TPROH1C Analog Output Module
IS200TPROH1C is suitable for measuring and controlling AC high currents in various electrical systems, electroplating, and electrolysis industries. This product has the following characteristics:
Product input saturation free: As the product adopts the Rogowski principle, it abandons the magnetic core that must be used in traditional transformer or Hall principles, allowing the input range of the product to be large without affecting its performance;
Fast response time: This product has a response time of up to US level and can be applied to fault recording and other aspects in the power system;
● Wide frequency response of the product: The bandwidth range of this product can reach over 20kHz and can be widely used for signal detection of complex input waveforms;
Good linearity of the product: The linearity of the product output can reach 0.2%, which can reflect the size of the input signal;
High product accuracy: The overall accuracy of the product is within 1%;
● Small size and light weight of the product: Compared to traditional transformer and Hall principle products, this product has a smaller size and lighter weight under the same input range conditions;
2、 Model Description
3、 Main technical indicators
Rated input 0-20 kaac
Rated output 0-20 madc, 0-5 vdc, 4-20 madc;
Accuracy level 1.0
Linear range 0-120%
Isolation withstand voltage 5000vdc/1 minute
Auxiliary power supply+12vdc, ± 12vdc,+24vdc
Working temperature -20 ℃~+60 ℃
Temperature drift<300ppm/℃
4、 Product wiring
The product is divided into a sensing head and an integrator. The sensing head and the integrator are connected through a shielded wire, and the wiring of the integrator is shown in the diagram
1. 2-pin: Sensor head input terminal
3-pin: Sensor head ground terminal
7. 8-pin: integrator auxiliary power input terminal
Pin 13: Output signal ground terminal
14 pins: Tracking voltage output terminal
15 pins: DC voltage output terminal
16 pins: DC current output terminal
5、 Product dimensions (unit: mm)
The integrator adopts an S-shaped external structure with the following dimensions: length x width x height=86x70x73mm
6、 Installation method
The integrator adopts din35 rail installation or screw fixed installation, and its installation dimensions are shown in the figure on the right. (Unit: mm)