Description
The FIREYE 85UVF1-1QDK3 Flame detector is a device specifically designed to detect the presence of flame, which is described in detail below:
Basic information
Model: FIREYE 85UVF1-1QDK3
Type: Flame detector
Technical characteristics
Solid-state flame Detection sensor: The flame detector applies a solid-state flame detection sensor, which is a microprocessor device capable of detecting the presence of a flame.
Wavelength detection range: It is capable of detecting ultraviolet light at wavelengths of 295-340nm, as well as optical sensitivity adjustment through advanced optical filters to detect visible light at wavelengths of 310nm to 500nm.
Automatic setting function: An internal relay that can automatically set the ON/OFF (fire/no fire) threshold value can cancel the remote amplifier or flame switch.
Frequency detection: The modulation amplitude (i.e. flame flicker characteristics) generated by the target flame is detected to detect a wide range of frequencies.
Self-test function: The probe has full self-diagnosis and electronic self-test function.
Application field
Combustion system monitoring: used to monitor the flame in the combustion system to ensure the normal operation and safety of the combustion process.
Boiler system: In industrial boiler systems, it is used to detect and monitor the flame in the boiler combustion chamber to ensure combustion efficiency and prevent fire.
Oil and gas industry: In oil and gas facilities, it is used to monitor flames to help detect potential fire risks early.
Chemical industry: In chemical plants or chemical production processes, the flame in the reactor is monitored to ensure the stability and safety of the process.
Fire protection systems: May be integrated into fire protection systems to detect and respond to fire risks in a timely manner, improving the safety of buildings and facilities.
Typical application
Flue burner
Industrial gas burners
Oil refining equipment
Low NOx burners
Waste gas treatment plant
incinerator
Setup and maintenance
The user can set the desired shutdown response time (FFRT) by operating the small keyboard, which is usually 1 second.
With four push-button keypads, various Settings can be adjusted.
The detector has an 8-digit number/letter LED display that displays information such as flame intensity.
Power supply and output
Requires 24Vdc power supply.
Cable connection via 8-pin electrical quick-release connector (QD model).
There is a standard 4-20mA flame intensity signal output.
Reviews
There are no reviews yet.