8521-TC-SA GE step-down switch regulator controller

Description

8521-TC-SA GE step-down switch regulator controller

Product features:

Complete measurement of single battery voltage and internal resistance, no battery discharge, easy to use. Proactively estimate battery capacity, intelligent data processing, convenient maintenance personnel analysis and processing. With fault alarm function, timely detection of battery operating problems, when the internal resistance and voltage of the monitored battery exceed the set upper and lower limits, together with sound and text alarm prompts. Measurement accuracy, repeatability is good, battery charging and discharging waveform and switching noise basically do not affect the internal resistance accuracy. The use of special test clips and special test heads will minimize the impact of contact resistance, and have maintenance functions. Low power consumption can work continuously for more than six hours. Powerful analysis software, analysis of data processing, to a variety of charts and actively generate test reports

Technical features:

Voltage test scale 0-16VV Voltage test accuracy: 0.2%

Voltage resolution 1mv single cell internal resistance test scale 0-50mω

Single cell internal resistance test accuracy 5% 2mΩ internal resistance resolution 1μΩ

20mΩ internal resistance resolution 10μΩ

1) It is equipped with 16 constant torque subdivision of equal view point, resolution 60000 steps/revolution, so that the work is smooth and the resolution is improved

2) Select a unique control circuit, useful to reduce the noise, increase the rolling stability

3) The reaction frequency can reach 200Kpps

4) When the stepping pulse is stopped for more than 100ms, the coil current is actively halved, reducing the motor overheating in many occasions

5) bipolar constant current chopper mode, so that the same motor can output greater speed and power

6) photoelectric blocking signal input/output

7) Drive current from 0.7A/ phase to 7.0A/ phase divided into 16 adjustable

8) Can drive any three-phase hybrid stepper motor with 7.0A phase current below single power input, voltage scale: AC110-220V

9) Error maintenance: a) overheat maintenance; b) Overcurrent and low voltage maintenance

10) The volume is 80x146x200mm3 and the weight is 2.5kgs.

GE	IS210AEBIH1BAA
Drager	6809720
GE	D1063S
GE	IS200TBAIH1C
GE	IS200TRLYH1D
GE	DS200TCQAG1B
GE	IS200TBAIH2C
GE	IS200TREGH1B
GE	IC697MDL750
GE	IC697MDL750B
GE	IC697MDL750F
GE	IC697MDL750RR
GE	IC697MDL752
GE	IC697MDL752CA
GE	IC697MDL752RR
GE	IC697MDL753