Honeywell CC-TDIL01 digital input board PLC module

Description

Honeywell CC-TDIL01 digital input board PLC module

1) The function of WD is to ensure that the output enters a safe state when there is a fault that may cause a dangerous situation to occur.

2) System parameters for WD monitoring include:

① The maximum execution time of an application loop. Make sure the program executes correctly and does not enter a dead loop.

The minimum execution time of an application loop. Make sure that the program executes correctly, and there is no jump, causing some programs to not execute.

③ Overvoltage and undervoltage monitoring of 5VDC power supply (5VDC±5%).

④ Memory error of CPU, COM card, etc. If a memory error occurs, the WD output loses power.

⑤ ESD input signal (manual Shutdown, pull the lower and upper offset cable, can make the CP Shutdown).

⑥ Turn the RESET switch to start the FSC system.

3) The WD card adopts a three-choice voting mechanism, that is, it has three sets of the same circuit to monitor the above system parameters.

Main products, superior supply, adequate inventory:
FOXOBORO(Foxboro)I/A: AW51B,P0400YC FBM02,P0400YV FBM18,P0400ZE FBM04,P0914WM FBM241C,FBM217 P0914TR,FBM242 P0916TA,CP40B P0961BC,FBM44 P0950BN, etc.
ALSOM MOTOROLA MVME series: MVME 162-12, MVME 167-02, MVME177-004, etc.
HP: Workstations, servers, HP 9000 workstations, HP 75000 Series spare parts, HP VXI test equipment.
Honeywell: DCS system spare parts module, HONEYWELL TDC series, QCS,S9000 and other spare parts.
Yaskawa: Servo controller, servo motor, servo driver.
Allen Bradley (Rockwell) :1756/1771/1785/2711 series examples, RelIance Electromechanical and other products.
Woodward: SPC valve position controller, PEAK150 digital controller.
NETWORK APPLIANCE: Data storage module.
SchneIder: MODICON 140 series, Quantum memory card, Quantum power module, etc.
XYCOM: Spare parts such as XVME-103, XVME-690, and VME bus.
FANUC: Modules, cards, drivers and other spare parts. NOKI (Nikon) : spare parts for cards and modules.
SIEMENS (SIemens) : SIemens IskamatIc, SIemens SImatIc S5, SIemens SImatIc C1, CNC system, etc.
Bosch Rexroth(Rexroth) : Electronic drive and control, I/O modules,PLC controllers, drives, etc.
Rexroth Indramat: Special products. ※ B&R: PLC
ABB:ABB MasterpIece200/AC450,ABB MastervIew 850/1,Advant OCS,MOD 30/MODCELL,MOD 300,BaIley INFI90,ABB ProcontIc,ABB Procontrol. And other system spare parts.
TOSHIBA: DSV1-DA,VCM1X4 2N8C2184P001-G,VCMIX4,VPCPX1,VBMPX1, etc.
HITACHI HITACHI: AIC200, CAM810 CPU800, CRT860, CTR850, CRT870, FLP800A, DHW850, etc.