PR6424/000-100 Vibration sensor

Description

The PR6424/000-100 vibration sensor is a sensor product produced by EPRO (Emerson), which is widely used in various industrial fields, especially in turbine monitoring and protection systems. The following is a detailed analysis of the sensor:

I. Product overview
Make and Model: EPRO (Emerson) PR6424/000-100 model vibration sensor.
Function and application: The sensor is mainly used to measure and monitor the vibration of rotating machinery, such as axial and radial shaft displacement, shaft eccentricity, shaft vibration, etc. It is an important part of the turbine monitoring and protection system (such as MMS3000 and MMS6000).
Second, technical characteristics
Non-contact measurement: The PR6424/000-100 vibration sensor uses a non-contact measurement method to accurately measure the change in clearance between the rotating part and the fixed part.
High precision and reliability: The sensor has high precision and high reliability to meet the needs of various industrial measurements.
Explosion-proof performance: With the addition of the safety grating, the sensors and precursors can operate in environments where explosion protection is required, in accordance with the relevant European standard EN50014/50020.
Various models and configurations: EPRO offers a wide range of eddy current sensors to meet different measurement needs and environmental requirements.
3. Technical parameters
Range: It may vary according to the specific model, but generally covers a range from small displacement to large displacement.
Sensitivity: The sensor has a high sensitivity and is able to accurately capture small vibration changes.
Rated air gap: The air gap between the sensor and the measured object needs to be adjusted to a certain range to ensure the accuracy of the measurement results.
Applicable temperature: The sensor is capable of operating over a wide temperature range, usually including a range of -35 ° C to +380 ° C.
4. Application field
PR6424/000-100 vibration sensor is widely used in chemical, paper, power generation, oil, natural gas and other industrial fields, especially in the need of high-precision vibration monitoring, such as steam turbine, compressor, generator and other rotating machinery monitoring and protection system.

To product, sufficient supply, sufficient stock:
1. Foxboro: I/A series system, FBM (field input/output module) sequence control, ladder logic control, accident recall processing, DAC, input/output signal processing, data communication and processing.
2.Invensys TrIconex: Redundant fault-tolerant control system, the most modern fault-tolerant controller based on Triple module redundancy (TMR) structure.
3.WestInghouse: Spare parts of OVATION system, WDPF system and MAX1000 system.
4.Rockwell Allen-Bradley: ICS TRIPLEX, RelIance, Ryan, 500/1747/1746 SLC, MIcroLogIx / / 1764/1762/1766, 1761/1763, LogIx CompactLogIx / 1769/1768 5000/17956/176774,PLC-5/1771/1785, etc
5.SchneIder ModIcon: Quantum 140 series processor, control card, power module, etc.
6.ABB: Industrial robot parts DSQC series (No. 2, 3, 4, S4C, S4C, IRC5),
7. Baileys INFI 90, etc
8.Motorola: MVME 162, MVME 167, MVME1772, MVME177 and other series.
9.XYCOM: I/O, VME board and processor.
10.GE FANUC (GE FANUC) : Spare parts such as modules, cards, and drivers.
11.Yaskawa: Servo controller, servo motor, servo driver.
12.Bosch Rexroth (Bosch Rexroth) : Indramat, I/O module, PLC controller, drive module, etc.
13.Woodward: SPC valve position controller, PEAK150 digital controller.
14. Industrial robot system spare parts
If you need, we can fix your defect part or exchange. Welcome to inquire! We will give you a good service!